DIGI XBee ZigBee
Low-cost ZigBee / 802.15.4 OEM Module
Eigenschaften
Beschreibung
Weitere Informationen
Ähnliche Produkte
Seite drucken
Preis anfragen
zeige Notizliste
PDF
Eigenschaften
Beschreibung
Weitere Informationen
PDF
- Interoperable with other ZigBee compliant devices*
- Programmable variants available with on-board microprocessor
- Supports binding and multicasting for Home Automation
- Through-Hole and Surface Mount form factors
- 15 general-purpose I/O lines
- Link budgets of 110 dB for XBee and 119 dB for XBee-PRO ZB
- Industry leading sleep current of sub 1uA
- Firmware upgrades via UART, SPI or over the air
XBee and XBee-PRO ZigBee RF modules provide cost-effective wireless connectivity to electronic devices. They are interoperable with other ZigBee PRO feature set devices, including devices from other vendors*.
XBee and XBee-PRO ZigBee modules are ideal for applications in the energy and controls markets where manufacturing efficiencies are critical. The Serial Peripheral Interface (SPI) provides a high-speed interface and optimizes integration with embedded microcontrollers, lowering development costs and reducing time to market. Features like binding and multicasting also allow for simple integration into a Home Automation device.
Products in the XBee family require no configuration or additional development. Programmable versions of the XBee and XBee-PRO ZigBee module make customizing applications easy. Programming directly on the module eliminates the need for a separate processor. Because the wireless software is isolated, applications can be developed with no risk to RF performance or security.
*Interoperability requires the ZigBee Feature Set or ZigBee PRO Feature Set to be deployed on all devices. Contact Digi Support for details.
Low Cost ZigBee
- Up to 300’ (100 m) range (RF line-of-sight, @ 250 Kbps)
- Up to 100’ (30 m) range (indoor/urban environments, @ 250 Kbps)
- 1 mW power output
- -92 dBm receiver sensitivity
- Power-down current reaches below 10 µA
Flexible Ad-hoc Networks
- ZigBee protocol allows mesh networking topologies
- Peer-to-peer, point-to-point, point-to-multipoint and multidrop networking
- 16 channel DSSS with over 65,000 available network addresses
- 2.4 GHz frequency band
Easy-to-Use
- Worldwide agency approvals (FCC, IC, ETSI)
- Serial UART interface
- Network compatible with other ZigBee devices
- Interchangeable with the XBee PRO module
Antenna Options
- Chip antenna
- U.FL RF connector (connects to SMA-type antennas)
- Wire antenna
Performance
- Data Rate
RF 250 Kbps, Serial up to 1 Mbps
Indoor/Urban Range
XBee ZigBee
- 200 ft (60 m)
- 300 ft (90 m)
Outdoor/RF Line-of-Sight Range
XBee ZigBee
- 4000 ft (1200 m)
- 2 miles (3200 m)
Transmit Power
XBee ZigBee
- 3.1 mW (+5 dBm) / 6.3 mW(+8 dBm) boost mode
- 63 mW (+18 dBm)
Receiver Sensitivity (1% PER)
XBee ZigBee
- -100 dBm / -102 dBm boost mode
- -101 dBm
Features
- Serial Data Interface
UART, SPI
Configuration Method
API or AT commands, local or over-the-air
Frequency Band
ISM 2.4 GHz
Form Factor
Through-Hole, Surface Mount
Interference Immunity
DSSS (Direct Sequence Spread Spectrum)
ADC Inputs
(4) 10-bit ADC inputs
Digital I/O
15
Antenna Options
Through-Hole: PCB Antenna, U.FL Connector, RPSMA Connector, or Integrated Wire
SMT: RF Pad, PCB Antenna, or U.FL Connector
Operating Temperature
-40º C to +85º C
Dimensions (L x W x H) and Weight
XBee ZigBee
- Through-Hole: 0.960 x 1.087 in (2.438 x 2.761 cm)
SMT: 0.866 x 1.33 x 0.120 in (2.199 x 3.4 x 0.305 cm)
- Through-Hole: 0.960 x 1.297 in (2.438 x 3.294 cm)
SMT: 0.866 x 1.33 x 0.120 in (2.199 x 3.4 x 0.305 cm)
Programmability
- Memory
XBee ZigBee
- N/A
- 32 KB Flash / 2 KB RAM
- N/A
- 32 KB Flash / 2 KB RAM
CPU/Clock Speed
XBee ZigBee
- N/A
- HCS08 / up to 50.33 MHz
- N/A
- HCS08 / up to 50.33 MHz
Networking and Security
- Protocol
ZigBee PRO 2007, HA-Ready with support for binding/multicasting
Encryption
128-bit AES
Reliable Packet Delivery
Retries/Acknowledgements
IDs
PAN ID and addresses, cluster IDs and endpoints (optional)
Channels
XBee ZigBee
- 16 channels
- 15 channels
Power Requirements
- Supply Voltage
XBee ZigBee
- 2.1 to 3.6V
- 2.7 to 3.6V
Transmit Current
XBee ZigBee
- 33 mA @ 3.3 VDC / 45 mA boost mode
- 47 mA @ 3.3 VDC / 59 mA boost mode
- 120 mA @ 3.3 VDC
- 120 mA @ 3.3 VDC
Receive Current
XBee ZigBee
- 28 mA @ 3.3 VDC / 31 mA boost mode
- 42 mA @ 3.3 VDC / 45 mA boost mode
- 31 mA @ 3.3 VDC
- 45 mA @ 3.3 VDC
Power-Down Current
XBee ZigBee
- <1 uA @ 25º C
- 1.5 uA @ 25º C
- <1 uA @ 25º C
- 1.5 uA @ 25º C
Regulatory Approvals
- ETSI (Europe)
XBee ZigBee
- Yes
- No
ORDERING INFORMATION
| DEVELOPMENT KITS | PART NUMBER |
| XBee ZigBee Mesh Kit | XKB2-Z7T-WZM |
| XBee ZigBee Cloud Kit | XKA2C-Z7T-U |
| XBee ZigBee RF SMT Module Development Kit | XK-Z11-S |
| XBee ZigBee RF SMT Module Development Kit, Australia (International) | XK-Z11-S-WA |
| Programmable XBee-PRO ZB SMT 32K Dev Kit, Japan (International) | XK2-Z7SBJ0 |
| Programmable XBee ZB SMT 32K Dev Kit, EMEA (International) | XK2-Z7SBE0 |
| XBEE TH | PART NUMBER |
| XBee ZigBee Through-Hole (PCB Antenna) | XB24CZ7PIT-004 |
| XBee ZigBee Through-Hole (RPSMA Antenna) | XB24CZ7SIT-004 |
| XBee ZigBee Through-Hole (Wire Antenna) | XB24CZ7WIT-004 |
| XBee ZigBee Through-Hole (U.FL Antenna) | XB24CZ7UIT-004 |
| XBEE TH PROGRAMMABLE | PART NUMBER |
| Programmable XBee ZigBee Through-Hole (RPSMA Antenna) | XB24CZ7SITB003 |
| Programmable XBee ZigBee Through-Hole (PCB Antenna) | XB24CZ7PITB003 |
| Programmable XBee ZigBee Through-Hole (Wire Antenna) | XB24CZ7WITB003 |
| Programmable XBee ZigBee Through-Hole (U.FL Antenna) | XB24CZ7UITB003 |
| XBEE SMT | PART NUMBER |
| XBee ZigBee SMT (PCB Antenna) | XB24CZ7PIS-004 |
| XBee ZigBee SMT (RF Pad Antenna) | XB24CZ7RIS-004 |
| XBee ZigBee SMT (U.FL Antenna) | XB24CZ7UIS-004 |
| XBEE SMT PROGRAMMABLE | PART NUMBER |
| Programmable XBee ZigBee SMT (PCB Antenna) | XB24CZ7PISB003 |
| Programmable XBee ZigBee SMT (U.FL Antenna) | XB24CZ7UISB003 |
| Programmable XBee ZigBee SMT (RF Pad Antenna) | XB24CZ7RISB003 |
| XBEE-PRO TH | PART NUMBER |
| XBee-PRO ZigBee Through-Hole (RPSMA Antenna) | XBP24CZ7SIT-004 |
| XBee-PRO ZigBee Through-Hole (PCB Antenna) | XBP24CZ7PIT-004 |
| XBee-PRO ZigBee Through-Hole (Wire Antenna) | XBP24CZ7WIT-004 |
| XBee-PRO ZigBee Through-Hole (U.FL Antenna) | XBP24CZ7UIT-004 |
| XBEE-PRO TH PROGRAMMABLE | PART NUMBER |
| Programmable XBee-PRO ZigBee Through-Hole (PCB Antenna) | XBP24CZ7PITB003 |
| Programmable XBee-PRO ZigBee Through-Hole (RPSMA Antenna) | XBP24CZ7SITB003 |
| Programmable XBee-PRO ZigBee Through-Hole (U.FL Antenna) | XBP24CZ7UITB003 |
| Programmable XBee-PRO ZigBee Through-Hole (Wire Antenna) | XBP24CZ7WITB003 |
| XBEE-PRO SMT | PART NUMBER |
| XBee-PRO ZigBee SMT (PCB Antenna) | XBP24CZ7PIS-004 |
| XBee-PRO ZigBee SMT (U.FL Antenna) | XBP24CZ7UIS-004 |
| XBee-PRO ZigBee SMT (RF Pad Antenna) | XBP24CZ7RIS-004 |
| XBEE-PRO SMT PROGRAMMABLE | PART NUMBER |
| Programmable XBee-PRO ZigBee SMT (PCB Antenna) | XBP24CZ7PISB003 |
| Programmable XBee-PRO ZigBee SMT (U.FL Antenna) | XBP24CZ7UISB003 |
| Programmable XBee-PRO ZigBee SMT (RF Pad Antenna) | XBP24CZ7RISB003 |
| ANTENNAS | PART NUMBER |
| Antenna - 2.4 GHz, half wave dipole, 2.1 dBi, RPSMA female, articulating. | A24-HASM-450 |
| Antenna - 2.4 GHz, half wave dipole, 2.1 dBi, RPSMA female, articulating. | A24-HASM-525 |
| Antenna - 2.4 GHz, quarter wave monopole, U.FL female. | A24-QUF-P4S |
| Antenna - WiFi, Table-top Mount, 2450Mhz, 0.5m cable. | DC-ANT-24DT |
Kunden, die diesen Artikel gesehen haben, sahen auch