Barix IP Audio Module 300 ( IPAM 300 )

SPHINX in Europa
CH
  • AT
  • BE
  • DK
  • FR
  • DE
  • IE
  • IT
  • NL
  • ES
  • SE
  • CH
  • UK
Produktgruppen > Embedded Audio > Barix IP Audio Module 300 ( IPAM 300 )

Barix IP Audio Module 300 ( IPAM 300 )

Audio decoder module with network, USB and serial interface

Barix IP Audio Module 300 ( IPAM 300 )
1441_16165.png
1441_30903.jpg
1441_34030.jpg
1441_34031.jpg
  • EigenschaftenEigenschaften
  • BeschreibungBeschreibung
  • Weitere InformationenWeitere Informationen
  • PDFPDF
  • AACplus, MP3, Ogg Vorbis, G.711, PCM Decoding
  • IP Streaming via TCP, UDP, RTP, Multicast
  • Line Level Output (Stereo)
  • General Purpose I/O (4)
  • RS-232 Serial Port (TTL Level)
  • Supply Voltage (3.3V)
  • USB Flash Memory Interface

The Barix IPAM 300 is a versatile network audio decoder module that plays MP3 or WMA (soon also G.711 & PCM) audio files and playlists from USB memory, PC or web server (http) or streams from sources like Shoutcast, Icecast (Internet radio) or RTP servers.

Installation and configuration
Installing a device containing the Barix IPAM 300 is fast and simple : After power-up the module gets either an IP address automatically (BootP or DHCP) or finds a free one using the IPzator feature. The unique SonicIP feature then announces the IP address over the audio outputs ! The module is easily configured and controlled by a standard web browser.

Standard and Streaming Client Firmware
Standard firmware for jukebox and multizone applications, as well as the streaming client firmware for commercial streaming applications with WMA and MP3 support, automatic failover (up to 3 URL’s / playing from USB memory) and monitoring capabilities are supported by the module (please see the Streaming Client Firmware data sheet).

Programmable ABCL Firmware
A fully programmable ABCL firmware version is available on request. ABCL stands for Audio Barix Control Language and is a simple to use yet powerful Basic dialect (please see the ABCL firmware data sheet).

Application development and integration
The Barix IPAM 300 supports various control and communication modes. Software developers can easily write audio applications using one of the openly documented Ethernet (cgi,TCP, UDP) or serial interfaces (API).

Hardware integration and evaluation
For hardware integration a technical document with schematic, pin-out and suggestions for the layout of a custom carrier PCB is available. For evaluation purposes Barix recommends the Barix Exstreamer 100.

Other modules
While the Barix IPAM 300 only decodes to analog audio the Barix IPAM can decode as well as encode analog and digital audio.

ProdGrafik

Applications

  • Playing audio from PC, jukebox applications, flash memory
  • Multiroom or multizone distributed audio systems
  • Commercial audio streaming applications (airports, hotels, etc.)
  • Realtime audio bridging over IP (when used with the Instreamer)
  • Paging and announcement applications
  • Instore audio distribution (realtime) for retail, restaurants, franchises




    Audio Interfaces and Formats
  • I2S bus (Inter-IC Sound), Analog stereo out 1.5Vpp, Volume, base and treble adjustable by application
  • AAC+ (HE-AAC V2 incl SBR and PS, needs licensing by OEM),MP3 up to 320 kBit fixed & variable bit rates, Ogg Vorbis (floor 1), WMA, G.711 (uLaw / aLaw @ 8 to 48 kHz), PCM (16 bit @ 8 to 48 kHz)

    Network Interface
  • 10/100 Mbit Ethernet (Auto), TCP/IP, UDP, RTP, HTTP, DHCP, SNMP, AutoIP, SonicIP, IPzator, ES-100/SPKR (Ethersound)

    Misc. Interfaces
  • TTL Level UART 300..230´400 Baud
  • Outputs for 2 dualcolor Ethernet status LEDs,
  • 4 General Purpose I/Os, 1 input for reset button,
  • 2 status LED outputs), USB1.1 interface for memory

    CPU / Memory
  • Integrated CPU / MAC / IO controller with on-chip 256 KB RAM, 2 KB EEprom (configuration), 2 MB Flash memory (application and web server content)

    Operating System
  • Embedded, robust OS, IP stack with Multicast support

    User / Application Interfaces
  • Integrated web server (control/configuration),
  • browser based, serial or Ethernet control API,
  • programmable software environment

    Power requirements
  • Single 3.3 VDC, 1.6 Watt max.

    Weight, dimensions
  • 14 g approx.
  • 2.2" x 1.3" x 0.39", 56 mm x 33 mm x 10 mm

    MTBF
  • Min. 950 000h acc. to MIL217F at 40°C


Kunden, die diesen Artikel gesehen haben, sahen auch
Alle Cookies akzeptieren Ablehnen Konfigurieren

Diese Website verwendet Cookies, um eine bestmögliche Erfahrung bieten zu können. Mehr erfahren.