MOXA ioLogik E2214
Active Ethernet I/O with 6 digital inputs and 6 relay outputs
- Front-end intelligence that supports 24 Click&Go™ rules
- Active Messaging with real-time stamp, including SMS, SNMP Trap with I/O status, TCP, and email
- Supports SNMPv1/v2c/v3 protocol
- I/O peer-to-peer function
- Built-in web console
- PC utility: Auto detection of installed modules
- Windows/WinCE VB/VC.NET and Linux C APIs
ioLogik E2214 ist ein eigenständiges, Active Ethernet I/O-Produkt mit sechs digitalen Eingängen und sechs Relaisausgängen. Der E2214 kann auf Hutschiene montiert und über Ethernet und IP-basierte Netzwerke mit zwei digitalen Switches, Alarmleuchten, Summern und Warnsirenen verbunden werden. ioLogik E2214 protokolliert auch den integrierten Nutzungszähler für den Relaisausgang. Auch im Falle eines plötzlichen Stromausfalls kann ioLogik E2214 die Nutzung des Relaisausgang im internen Speicher ablegen, bevor die Stromversorgung vollständig unterbrochen wird.
ioLogik E2214 Specifications
Inputs and Outputs
Digital Inputs
6 channels
Relay Outputs
6 channels
Isolation
3k VDC or 2k Vrms
Digital Input
Sensor Type
Wet Contact (NPN or PNP) and Dry Contact
I/O Mode
DI or Event Counter
Dry Contact
- On: short to GND
- Off: open
Wet Contact (DI to GND)
- On: 0 to 3 VDC
- Off: 10 to 30 VDC
Common Type
3 points per COM
Counter Frequency
900 Hz
Digital Filtering Time Interval
Software Configurable
Relay Output
Type
Form A (N.O.) power relay
Contact Current Rating
- Inductive Load: 2 A @ 30 VDC, 250 VAC, 110 VAC
- Resistive Load: 5 A @ 30 VDC, 250 VAC, 110 VAC
Minimum permitted load
1 A @ 5 VDC
Initial Insulation Resistance
1000 M ohms (min.) @ 500 VDC
Mechanical endurance
1,000,000 operationsElectrical endurance: 100,000 operations @ 5 A resistive load
Contact Resistance
100 m ohms (max.)
Pulse Output
0.3 Hz at rated load
Power Requirements
Power Consumption
170 mA @ 24 VDC
MTBF (mean time between failures)
Time
307,239 hrs
Database
Telcordia (Bellcore)
Common Specifications
LAN
Ethernet
1 10/100 Mbps RJ45 port
Protection
1.5 kV magnetic isolation
Protocols
Modbus/TCP, TCP/IP, UDP, DHCP, BOOTP, SNMP, HTTP, CGI, SNTP, SMTP
Serial Communication
Interface
RS-485-2w: Data+, Data-, GND (3-contact terminal block)
Serial
Line Protection 15 kV ESD for all signals
Serial Communication Parameters
Parity
None
Data Bits
8
Stop Bits
1
Flow Control
None
Baudrate
1200 to 115200 bps
Protocol
Modbus/RTU
Power Requirements
Power Input
24 VDC nominal, 12 to 36 VDC
Physical Characteristics
Wiring
I/O cable max. 14 AWG
Dimensions
115 x 79 x 45.6 mm (4.53 x 3.11 x 1.80 in)
Weight
under 250 g
Mounting
DIN rail or wall
Environmental Limits
Operating Temperature
Standard Models: -10 to 60°C (14 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature
-40 to 85°C (-40 to 185°F)
Ambient Relative Humidity
5 to 95% (non-condensing)
Altitude
Up to 2000 m
Note Please contact us if you require products guaranteed to function properly at higher altitudes.
Standards and Certifications
Safety
UL 508
EMI
EN 61000-3-2; EN 61000-3-3; EN 61000-6-4;
FCC
Part 15, Subpart B, Class A
EMS
EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-5, EN 61000-4-6,
EN 61000-4-8, EN 61000-4-11, EN 61000-6-2
Shock
IEC 60068-2-27
Freefall
IEC 60068-2-32
Vibration
IEC 60068-2-6
Green Product
RoHS, CRoHS, WEEE
Ordering Information
Available Modules | |
ioLogik E2214 | Ethernet Micro RTU Controller with 6 digital inputs and 6 relay outputs |
ioLogik E2214-T | Ethernet Micro RTU Controller with 6 digital inputs and 6 relay outputs, -40 to 85°C operating temperature |
Kunden, die diesen Artikel gesehen haben, sahen auch