DIGI XBee DigiMesh Adapters
2.4 GHz Wireless Adapters
- Simple topology to deploy and grow
- Self-healing and discovery for network stability
- Sleeping routers supported for long battery life
- No master/coordinator required
- Compatible with ConnectPort X gateways and other devices using DigiMesh
XBee and XBee-PRO DigiMesh adapters deliver wireless connectivity to electronic devices using the DigiMesh protocol. This innovative, peer-to-peer networking protocol offers users increased stability by forming self-healing, self-discovering mesh networks. DigiMesh features dense network operation and support for sleeping routers, extending the operational life of battery dependent networks.
XBee and XBee-PRO DigiMesh adapters are available in 2.4 GHz and 900 MHz variants. Interface options include RS-232, RS-485, USB, digital and analog interfaces.
XBee-PRO 868 Adapters are also available, with interface options including RS-232, RS-485, and Digital/Analog interfaces. These adapters utilize a point to multi-point topology, with an outdoor LOS range of up to 80km. Ideal for challenging wireless environments where RF penetration and transmission distance are critical to the application.
XBee and XBee-PRO DigiMesh adapters are available in 2.4 GHz and 900 MHz variants. Interface options include RS-232, RS-485, USB, digital and analog interfaces.
XBee-PRO 868 Adapters are also available, with interface options including RS-232, RS-485, and Digital/Analog interfaces. These adapters utilize a point to multi-point topology, with an outdoor LOS range of up to 80km. Ideal for challenging wireless environments where RF penetration and transmission distance are critical to the application.
XBee-PRO DigiMesh 2.4, USB adapter (International) XA-M14-CE1P-W
XBee-PRO DigiMesh 2.4, RS-232 adapter (3-6V) (International) XA-M14-CS2P-W
XBee-PRO DigiMesh 2.4, RS-485 adapter (3-6V) (International) XA-M14-CS3P-W
XBee-PRO DigiMesh 2.4, digital IO adapter (3-6V) (International) XA-M14-CS4P-W
XBee-PRO DigiMesh 2.4, analog input adapter (3-6V) (International) XA-M14-CS5P-W
XBee-PRO DigiMesh 2.4, RS-232 adapter (3-6V) (International) XA-M14-CS2P-W
XBee-PRO DigiMesh 2.4, RS-485 adapter (3-6V) (International) XA-M14-CS3P-W
XBee-PRO DigiMesh 2.4, digital IO adapter (3-6V) (International) XA-M14-CS4P-W
XBee-PRO DigiMesh 2.4, analog input adapter (3-6V) (International) XA-M14-CS5P-W
- Performance
Data Rate
250 Kbps
Indoor/Urban Range
300 ft (90 m) / 200 ft (60 m) Int´l variant
Outdoor/RF Line-of-Sight Range
1 mile (1.6 km) / 2500 ft (750 m) Int´l variant
Transmit Power
63 mW (+18 dBm) / 10 mW (+10 dBm) Int´l variant
Receiver Sensitivity (1% PER)
-100 dBm
Features
Configuration Method
API or AT commands
Frequency Band
2.4 GHz ISM
Interference Immunity
DSSS (Direct Sequence Spread Spectrum)
Serial Data Interface
RS-232 DB9M/DTE or RS-485 (6-position wire terminal block) switch selectable between RS-422 half-duplex, RS-422 full duplex and RS-485
USB Data Interface
USB 2.0 full speed (with ESD protection); connects to host via captive 1-meter cable
Analog Interface & Digital I/O
6-position wire terminal block; Analog: 0 - 10V, 4 - 20 mA, or +/- 2VDC differential; Digital IO: Digital input or sinking driver output
Antenna Type
RPSMA (USB uses internal wire antenna)
LEDs
Power: Glows green when external power is supplied (not active when battery powered to limit power drain) Associate: Blinks when unit is connected and associated on an RF network
Operating Temperature
-40° C to +70° C (-40° F to +158° F)
Dimensions
RS-232, RS-485, Analog, Digital I/O models: 3.60 in x 1.90 in x 1.20 in (9.14 cm x 4.82 cm x 3.04 cm) USB models: 2.87 in x 1.80 in x 0.83 in (7.29 cm x 4.57 cm x 2.10 cm)
Weight
RS-232, RS-485, Analog, Digital I/O models: 2.29 oz (64.92 g) USB models: 1.60 oz (45.36 g)
Networking & Security
Encryption
128-bit AES
Reliable Packet Delivery
Retries/Acknowledgements
Addressing Options
PAN ID, channel, 64-bit address
Channels
16
Power Requirements
Power Input
3.7 - 6.0VDC
Power Supply
120VAC/240VAC to 5VDC power supply, internal lithium battery pack or external 6-cell D battery holder (all sold separately)
USB Model
Bus powered (+5V)
Transmit Current
210 mA
Receive Current
55 mA
Regulatory Approvals
Emissions
FCC Part 15, EN55022:2006 Class B, ICES-003Iss.4, EN55024:1998+A1 (2001) + A2 (2003), AS/NZS CISPR 22:2006, VCCI V 3/2007.04
Safety
IEC/EN 60950-1 (2001), CB Certificate, UL/cUL 60950-1
RoHS
Yes
Platform XBee-PRO 868
Performance
RF Data Rate
24 Kbps (limited to 10% duty cycle)
Indoor/Urban Range
Up to 1800 ft (550 m)
Outdoor/RF Line-of-Sight Range
Up to 25 miles (40 km) with dipole antenna Up to 10 miles (16 km) with dipole antenna (13.7 dBm) - Italy only
Transmit Power
1 mW (0 dBm) to 315 mW (+25 dBm)
Receiver Sensitivity
(1% PER) -112 dBm
Features
Serial Data Interface
3.3V CMOS Serial UART
Configuration Method
API and AT commands
Frequency Band
868 MHz ISM
Interference Immunity
Multiple transmissions, acknowledgements
Serial Data Rate
1.2 Kbps to 230.4 Kbps (nonstandard rates available)
ADC Inputs
6 (10-bit)
Digital I/O
13
Antenna Options
Wired Whip, U.FL connector, RPSMA connector
Networking & Security
Encryption
128-bit AES
Reliable Packet Delivery
Retries/Acknowledgments
Addressing Options
Network ID, 64-bit address
Channels
Single channel
Power Requirements
Supply Voltage
3.0 – 3.6 VDC
Transmit Current
500 mA typical at 3.3V (800 mA max)
Receive Current
65 mA typical
Power-Down Current
55 uA
Kunden, die diesen Artikel gesehen haben, sahen auch