AKCP Single Port Temperature and Humidity Sensor ...

SPHINX in Europa
CH
  • AT
  • BE
  • DK
  • FR
  • DE
  • IE
  • IT
  • NL
  • ES
  • SE
  • CH
  • UK
Produktgruppen > Environmental Sensors > AKCP Single Port Temperature and Humidity Sensor ...

AKCP Single Port Temperature and Humidity Sensor (Water Resistant)

Product is End of Life : 2021-10-25
Water resistant dual sensor for damp environments

AKCP Single Port Temperature and Humidity Sensor (Water Resistant)
3989_32699.jpg
3989_7109.png
  • EigenschaftenEigenschaften
  • BeschreibungBeschreibung
  • Weitere InformationenWeitere Informationen
  • PDFPDF
  • Monitors temperature and humidity on a single intelligent sensor port
  • Designed for use in wet/damp/outdoor environments
  • Own SNMP OID for data collection via a network
  • Temperature measurement from -40ºC – +75ºC
  • Relative Humidity measurement from 0% – 100%
  • Powered by base unit, no additional power needed
In situations where both temperature and humidity can be critical you can keep up to speed on the current conditions using this sensor. Combining temperature and humidity into the one sensor frees up an additional intelligent sensor port on your base unit.
Setup is simple with the sensorProbe and securityProbe autosense function. Once plugged into the intelligent sensor port the base unit automatically detects the sensors presence and configures it for you.
All you need to do is set your thresholds for low and high warning and critical parameters. The built in graphing function of the base unit gives you a pattern of temperature or humidity trends over time.

The AKCP single port dual Temperature & Humidity Sensors has both temperature and humidity measuring capabilities in a single sensor. This extends the capability of the sensorProbe to measure up to 8 temperature and 8 humidity sensing parameters, just by connecting 8 dual sensor.

Up to 2 dual sensors can be plugged into the RJ-45 jacks on the sensorProbe2 and up to 8 sensors on the sensorProbe8, sensorProbe8-X20/X60.

You can connect up to 8 on the securityProbe main unit and 8 more on each E-sensor8 expansion module. Specially designed CAT 5 cable assures a correct reading up to 100 feet, and is available in standard length of 1 foot, 15 feet, 60 feet and 100 feet, allowing the sensors to be positioned in hot spots. These dual sensors can be extended beyond their standard length.

In some cases they can be extended up to 1,000 feet (only the THS00 remote type should be extended).

When the dual sensor is plugged into the RJ-45 port, the sensorProbe will auto detect the sensor, and it will display Temperature & Humidity for each RJ-45 port. A built in graph option is included on all sensorProbes for graphing temperature and humidity variations over a period of time.

Each Temperature Humidity Sensor has its own SNMP OID so that the data can be collected over network and graphed using external application like MRTG. The Temperature Humidity Sensor can be read using included SNMP utilities to allow graphing and data logging at 0.2°C resolution. We also sell a Water resistant version of our Temperature Humidity Sensor Water resistant Product Code : THSW15

ProdGrafik
Specifications

Temperature

Measurement Range Celsius
  • -40°C to +75°

Measurement Resolution Celsius
  • 1°C

Measurement Accuracy Celsius
  • Maximum ±2.3 at -40ºC, minimum ±0.4 at +25ºC and ±1.7 at +75ºC

Measurement Range Fahrenheit
  • -40°F to +167°F

Measurement Resolution Fahrenheit
  • 1°F increments

Measurement Accuracy Fahrenheit
  • Maximum ±4.1 at -40ºF, minimum ±0.9 at +25ºC and ±4 at +167ºF

Communications Cable :
  • RJ45 jack to temperature sensor using UTP Cat 5 wire

Sensor Type :
  • semiconductor microprocessor controlled

Power Source :
  • powered by the sensorProbe. No additional power needed.

Power Consumption :
  • Typical 10.70 mWatt, 2.14mA
  • sensorProbe autodetects the presence of the temperature sensor

Measurement Rate :
  • one reading every second
  • Up to 2 temperature sensors per sensorProbe2, 8 per sensorProbe8.
  • You can connect up to 8 on the securityProbe main unit and 8 more on each E-sensor8 expansion module.

OID temperature sensorProbeTempDegree =
  • 1.3.6.1.4.1.3854.1.2.2.1.16.1.3.X

OID temperature sensorProbeTempStatus =
  • 1.3.6.1.4.1.3854.1.2.2.1.16.1.4.X

OID humidity sensorProbeHumidityPercent =
  • 1.3.6.1.4.1.3854.1.2.2.1.17.1.3.X

OID humidity sensorProbeHumidityStatus =
  • 1.3.6.1.4.1.3854.1.2.2.1.17.1.4.X

Humidity

Measurement range
  • 0 to 100% Relative humidity

Resolution
  • 1%

Accuracy at 25°C
  • ±3%

Communications cable
  • UTP Cat 5 cable

Power source
  • Powered by the sensorProbe. No additional power needed

Power Consumption
  • Typical 7.25 mWatt, 1.45mA
  • Sensor element wettable without damage
  • sensorProbe auto detects the presence of the dual sensor
  • Up to 2 dual sensors per sensorProbe2, 8 per sensorProbe8 and securityProbe


Our Single Port Temperature/Humidity Sensor is calibrated using dedicated equipment which is calibrated according to ISO/IEC 17025 and calibrated by comparison against natural standards, natural physical constants, consensus standards, or by ratio type measurements using self-calibrating techniques.

Standards incorporated to establish this comparison are NIST and NPL traceable.
Our Single Port Temperature/Humidity Sensor comply with RoHS and WEEE requirements. There is no substance to be declared.

Kunden, die diesen Artikel gesehen haben, sahen auch
Alle Cookies akzeptieren Ablehnen Konfigurieren

Diese Website verwendet Cookies, um eine bestmögliche Erfahrung bieten zu können. Mehr erfahren.