AKCP PIR Hardware Motion Detector (MD00)

The AKCess Pro PIR Hardware Motion Detector is the perfect accompaniment as part of your security monitoring system. Its unique design allows mounting in either ceiling or walls and characterizes the optimum detection angle to prevent false alarms.

Although compatible with both sensorProbe and securityProbe product series, it is ideally suited to the securityProbe product line. When combined with the securityProbe 5E?s notifications, cameras and security sensor it provides a complete network enabled security monitoring system.

When motion is detected notifications can be sent from the securityProbe 5E via SMS, E-mail or MMS (amongst others) and even have pictures from installed cameras attached to give instant visual feedback as to the developing situation.

Its unique design makes it possible to be mounted on a wall or ceiling. It is available in a small easy-to-install package. To prevent false alarms, this motion detector characterizes the optimum detection angle.

It is also compatible with any AKCP sensorProbe and securityProbe, or securityProbe 5E. To add versatility, up to 10 motion detectors can be linked together and plugged into a single RJ-45 sensor port.

Specifications

Measurement Range
Alarm or Normal

Sensor Type
Infrared sensor dual element
High sensitivity

Detection angle
60°

Maximum working distance is 3 m (9 Ft)
High RFI immunity

Daisy Chainable
Up to 10 Motion Detector Sensors on a single port

Operating Temperature
-20 °C~50 °C
4 °F~122 °F


Interface


Communications Cable
RJ-45 jack to sensor using UTP Cat 5 wire

Communications Cable Max. length
With approved low capacitance shielded cable or UTP
Maximum cable length of single motion detector sensor is 300 m (100 Ft)
Maximum total cable length of a string of 10 motion sensors is 46 m (150 Ft)
Maximum length of cable between each motion sensor should less than 6 m (20 Ft)

Power Source
Powered by the controller unit. No additional power needed

Full autosense including disconnect alarm

Power Consumption
Typical 50 mWatt, 10mA

Dimensions
65(W) x 62(H) x 15(D) mm

Mounting
Wall/ceiling mounted design
DIN rail mounting
Screw mounting

Sensor count
1

Product Code:
MD00





Ordering Information

Product Model	Order Number	Description
PIR Hardware Motion Detector
MD00	949013	5ft cable Siren & Strobe
MD15		5ft PIR Hardware Motion Detector
MD40		40ft PIR Hardware Motion Detector
MD60		60ft PIR Hardware Motion Detector
MD100		100ft PIR Hardware Motion Detector