AKCP IO-Digital8 Sensor (IODC8)

SPHINX in Europa
CH
  • AT
  • BE
  • DK
  • FR
  • DE
  • IE
  • IT
  • NL
  • ES
  • SE
  • CH
  • UK
Produktgruppen > Environmental Sensors > AKCP IO-Digital8 Sensor (IODC8)

AKCP IO-Digital8 Sensor (IODC8)

IO-Digital8 sensor with 8 ALARM/NORMAL indication

AKCP IO-Digital8 Sensor (IODC8)
4000_7124.png
4000_28770.png
  • EigenschaftenEigenschaften
  • BeschreibungBeschreibung
  • Weitere InformationenWeitere Informationen
  • PDFPDF
  • SNMP interface for alarm/normal status
  • SNMP traps sent when critical
  • SNMP polling via get command
  • When an alarm condition is activated the description and location of the fault can be sent via email, SMS, MMS, Skype, phone calls and other advanced notifications from the securityProbe 5E?s web interface
  • Each of the 8 dry contacts on the IO-digital8 sensor can also be configured as outputs either 0 VDC or 5 VDC and can sink up to 20 mA of current when connected to a load
IO-Digital8 sensor with 8 ALARM/NORMAL indication in the AKCess Pro securityProbe 5E web interface. Can have 8 dry contacts on one Intelligent Sensor port. The main housing can be mounted on a wall and a standard CAT5 cable can be run to the intelligent sensor port on the securityProbe 5E.

There are two versions of the IO-digital8 depending on your requirements.

The first version has a single RJ45 connector at one end and 8 x 2 pin dry contact connectors along one side.

The second unit also has a single RJ45 connector at one end but the 8 x 2 pin dry contact connectors are replaced by two RJ45 connectors, each compatible with 4 dry contacts.

The dry contacts can be configured as inputs or outputs and the IO-digital8 is user definable so can be used to detect many different inputs such as UPS status, security systems, alarm panels or air conditioning status.

ProdGrafik
Specifications

Measurement range :
  • Alarm or Normal

Communications cable :
  • RJ45 jack to sensor using UTP Cat 5 wire, Maximum extension cable length 305m (1000 ft.) with approved low capacitance shielded cable or UTP

Sensor type :
  • Open/closed or cycles contact switches

Input voltage range :
  • 0 to 5 volts on each of the 8 dry contacts

Current Range :
  • Can sink up to 20 mAmps on each of the 8 dry contacts

Measurement rate :
  • Multiple readings every second

Power source :
  • Powered by the securityProbe 5E. No additional power needed
  • Normal input voltage is settable under software on each of the 8 dry contacts
  • Normally open, normally closed is settable under software on each of the 8 dry contacts
  • Only compatible on AKCess Pro securityProbe line of units
  • securityProbe 5E autodetects the presence of each dry contact on the IO-digital8
  • Connect up to 8 IO-digital8 sensors per each securityProbe 5E main unit and E-sensor8 expansion modules for a total of 64 dry contacts per box
  • Full autosense including disconnect alarm



Product Code:
IODC8



Ordering Information


    Product Model         Order Number     Description
securityProbe / sensorProbe+ Expansion Units
IODC8 940031 IO-Digital8 adapter with 8 dry contact via 8x 2pin connectors      
IODCRJ8 940032 IO-Digital8 with 8 dry contacts via 2x RJ45 port

Kunden, die diesen Artikel gesehen haben, sahen auch
Alle Cookies akzeptieren Ablehnen Konfigurieren

Diese Website verwendet Cookies, um eine bestmögliche Erfahrung bieten zu können. Mehr erfahren.