Advantech APAX-5040PE
Product is End of Life : 2020-10-27
IEC 61850-3 Certified 24-ch Digital Input Module
- IEC-61850-3 compliant
- Wide operation temperature support from -20 ~70°C
- Supports both sink and source type input
- Rated voltage input value: 24 VDC
- ±70 VDC over voltage protection
- Input characteristic curve according to IEC 61131, type 1
- Each digital channel has its own status LED
- Isolation between channels and backplane
APAX-5040PE modules offer 24 digital input channels. Their input channels can accept 2-wiring inputs from a DC voltage source, to determine the state of limits, standard switches or proximity switches. This module is an IEC-61850-3 compliant I/O modules, and suitable for power and energy related application.
Certification
Dielectric Strength and Impulse Tests:
CE, FCC class A
EMC Immunity:
IEC 60255-5:2000
Electronic Discharge:
IEC 61000-4-2:2001,level3
Radiated RF Immunity:
IEC 61000-4-3:2002, 10 V/m, IEEE C37.90.2-1995, 35 V/m
Fast Transient, Burst Immunity:
IEC 61000-4-4:1995 + A1:2001, 4kV @ 2.5KHz
Surge Immunity:
IEC 61000-4-5:2001, 2kV line to line, 4kV line to earth
Conducted RF Immunity:
IEC 61000-4-6:2004, 10 Vrms
Magnetic Field Immunity:
IEC 61000-4-8:2001, 1000 A/m for 3 seconds, 100 A/m for 1 minute
DOMF:
IEC 61000-4-10:2001, 30 A/m @ 100KHz and1 MHz
EMC Emissions
30 x 139 x 100 mm
Enclosure
ABS+PC
Weight
160 g
Power Consumption
2 W @ 24 V DC (Typical)
Status Display
LED per channel; On: Logic
level 1; Off: Logic level 0
Digital Input
Channels
24
Points per Common
12
Type
Sink or Source Load
Input Voltage
Rated Value: 24 V DC
For "0" signal: - 5 ~ 5 V DC
For "1" signal: 15 ~ 30 V DC and -15 ~ -30 V DC
Input Impedance
10 kΩ
Input Delay
From logic level 0 to 1: 0.2 ms;
From logic level 1 to 0: 0.2 ms
Operating Frequency
3 kHz
Input Filter
3 ms
Protection
2,500 V DC Isolation Between Channels and Backplane
Over Voltage Protection
Environment
Operating Temperature
-20 ~ 70°C (-4 ~ 158°F)
Storage Temperature
-40 ~ 85°C
Relative Humidity
5 ~ 95% (non-condensing)
Ordering Information
APAX-5040PE
Dielectric Strength and Impulse Tests:
CE, FCC class A
EMC Immunity:
IEC 60255-5:2000
Electronic Discharge:
IEC 61000-4-2:2001,level3
Radiated RF Immunity:
IEC 61000-4-3:2002, 10 V/m, IEEE C37.90.2-1995, 35 V/m
Fast Transient, Burst Immunity:
IEC 61000-4-4:1995 + A1:2001, 4kV @ 2.5KHz
Surge Immunity:
IEC 61000-4-5:2001, 2kV line to line, 4kV line to earth
Conducted RF Immunity:
IEC 61000-4-6:2004, 10 Vrms
Magnetic Field Immunity:
IEC 61000-4-8:2001, 1000 A/m for 3 seconds, 100 A/m for 1 minute
DOMF:
IEC 61000-4-10:2001, 30 A/m @ 100KHz and1 MHz
EMC Emissions
- Conducted Emissions:
EN 55022:2002, Class A
Radiated Emissions:
EN 55022:2002, Class A
30 x 139 x 100 mm
Enclosure
ABS+PC
Weight
160 g
Power Consumption
2 W @ 24 V DC (Typical)
Status Display
LED per channel; On: Logic
level 1; Off: Logic level 0
Digital Input
Channels
24
Points per Common
12
Type
Sink or Source Load
Input Voltage
Rated Value: 24 V DC
For "0" signal: - 5 ~ 5 V DC
For "1" signal: 15 ~ 30 V DC and -15 ~ -30 V DC
Input Impedance
10 kΩ
Input Delay
From logic level 0 to 1: 0.2 ms;
From logic level 1 to 0: 0.2 ms
Operating Frequency
3 kHz
Input Filter
3 ms
Protection
2,500 V DC Isolation Between Channels and Backplane
Over Voltage Protection
Environment
Operating Temperature
-20 ~ 70°C (-4 ~ 158°F)
Storage Temperature
-40 ~ 85°C
Relative Humidity
5 ~ 95% (non-condensing)
Ordering Information
APAX-5040PE
- IEC 61850-3 Compliant 24-ch Digital Input Module
Kunden, die diesen Artikel gesehen haben, sahen auch