Advantech BB Zlinx Xtreme Wireless I/O
IP67 Industrial Outdoor Rated
- Wire replacement for serial communications - cable-free, license-free
- Baud: 250 kbps (2.4 GHz, short range); 9.6 or 115.2 S/W selectable (900 MHz, long-range, North America only)
- Wide operating temperature range: -40 to +74 °C
- IP67, heavy-duty, industrial grade, DIN rail mount
- Wide range power input: 10 - 30 VDC
- Flexible configuration for multiple types of analog/digital I/Os
- Signal Strength Indicator (SSI), AES encryption, Modbus compatible
- UL C1/D2; CE (2.4 GHz only
Do you need to monitor remote assets via discrete analog and digital sensors or control remote control equipment from a central SCADA/PLC? Is your remote equipment outdoors? Zlinx Xtreme I/Os can do the job faster, easier and more economically than running cable.
These compact and rugged IP67 units are ideal for outdoor applications and extreme weather conditions for connecting remote I/Os to local I/Os wirelessly (via peer-to-peer mode) or to connect remote I/Os in multiple locations to a central PLC/SCADA/HMI system via a serial radio modem (via Modbus mode).
Zlinx industrial wireless products operate in license-free, proprietary RF 900 MHz and 2.4 GHz ISM bands. Select the 900 MHz version for longer distances (North America only). For further flexibility, the output power is software selectable. The 900 MHz unit offers 256-bit AES encryption. The 2.4 GHz has 128-bit AES encryption.
A starter kit, Model BB-ZXT9-IOA-KIT, conveniently bundles two 900 MHz IO units, two power supplies and a USB programming cable to set up your application. (North America only.)
SPECIFICATIONS
RF PROPERTIES | |
Physical Standard | 802.15.4 |
FREQUENCY | |
BB-ZXT9-IO-222R2 | 900 MHz ISM (902 – 928 MHz) |
BB-ZXT24-IO-222R2 | 2.4 GHz ISM (2.4 – 2.5 GHz) |
TRANSMIT POWER | |
BB-ZXT9-IO-222R2 (NATAM only) | 1 mW, 10 mW, 100 mW, 500 mW 1 W – software selectable |
BB-ZXT24-IO-222R2 | 10 mW, 16 mW, 25 mW, 30 mW 63 mW – software selectable |
RECEIVER SENSITIVITY | |
BB-ZXT9-IO-222R2 | -100 dBm |
BB-ZXT24-IO-222R2 | -105 dBm |
OVER THE AIR DATA RATE | |
BB-ZXT9-IO-222R2 | 9.6 or 115.2 kbps, software selectable |
BB-ZXT24-IO-222R2 | 250 kbps |
OUTDOOR RANGE Range estimates based on optimal RF conditions and an unobstructed line of sight. | |
BB-ZXT9-IO-222R2 | Supplied Antenna – 23 km (14 mi) High Gain Antenna – 64 km (40 mi) |
BB-ZXT24-IO-222R2 | Supplied Antenna – 2.4 km (1.5 mi) High Gain Antenna – 6 km (10 mi) |
TRANSMISSION METHOD | |
BB-ZXT9-IO-222R2 | FHSS |
BB-ZXT24-IO-222R2 | DSSS |
Modulation | FSK |
CHANNEL CAPACITY | |
BB-ZXT9-IO-222R2 | 10 hop sequences share 50 frequencies |
BB-ZXT24-IO-222R2 | 12 direct sequence channels |
Network Topologies | I/O to I/O: one-to-one (peer-to-peer mode) Radio Modem to I/O: one-to-many (Modbus I/O mode) |
ENCRYPTION | |
BB-ZXT9-IO-222R2 | 256-bit AES |
BB-ZXT24-IO-222R2 | 128-bit AES |
SUPPLIED ANTENNA | |
BB-ZXT9-IO-222R2 | Impedance – 50 Ω Connector – RPSMA female VSWR – 2.0 maximum (in-band) Gain – 3 dBi Polarization – vertical Length – 198 mm (7.8 in) |
BB-ZXT24-IO-222R2 | Impedance – 50Ω Connector – RPSMA female VSWR – 2.0 maximum (in-band) Gain – 2.1 dBi Polarization – vertical Length – 113 mm (4.38 in) |
Antenna Connection | RPSMA male |
CONTROLS AND INDICATORS | |
Signal Strength | 8 Green RSSI LEDs indicate signal strength |
Power | Green LED |
Receive Data | Green LED |
Transmit Data | Green LED |
Programming Port | USB |
Reset | Push Button |
OPERATING SYSTEM | |
O/S Windows | XP, 7, 8, 8.1, 10 |
DIGITAL INPUTS | |
Voltage Range, Configuration | 0 – 48 VDC PNP (default) / NPN (selectable) |
Low Voltage (0) | 1 VDC maximum |
High Voltage (1) | Greater than 1 VDC |
Pull Up/Down Current | 38 µA |
Frequency Input | 2 DI per module, software selectable as counters with 0 to 20 KHz range |
DIGITAL OUTPUTS (RELAY) | |
Number of Relays | 2 |
Type | C (Normally Open and Normally Closed) |
Output Connection | 3 Terminals per relay (Common, NO, NC) |
Communication Connection | 3.5 mm Terminal Block |
Ratings | 250 VAC @ 4 A, 30 VDC @ 4 A |
ANALOG INPUTS / OUTPUTS | |
Ranges | 0 – 5 VDC, 0 – 10 VDC, 0 – 20 mA, 4 – 20 mA |
Resolution | 16-bit (Inputs), 12-bit (outputs) |
AI Load Resistance | 100 MΩ – configured for Voltage 250 Ω – configured for Current |
AO Output Current | 1 mA maximum, configured for Voltage |
AO Source Load | 450 Ω maximum, configured for current |
Input Protection | Over-voltage to 2x maximum input voltage |
POWER | |
Power Connector | Terminal Block |
Input Voltage | 10 – 30 VDC |
Power Use: | |
BB-ZXT9-IO-222R2 | 6.8 W maximum |
BB-ZXT24-IO-222R2 | 4.5 W maximum |
TERMINAL BLOCKS | |
Wire Size | 26 – 4 AWG |
Torque | 0.5 Nm (minimum), 0.6 Nm maximum |
ENVIRONMENT | |
Dimensions | 13.01 x 13.01 x 6.02 cm (5.12 x 5.12 x 2.37 in) |
Operating Temperature | -40 to +74 °C (-40 to +165 °F) |
Storage Temperature | -40 to +85 °C (-40 to +185 °F) |
Operating Humidity | 0 – 95% (non-condensing) |
Enclosure Rating | IP67 |
Use | Indoor and Outdoor |
MEANTIME BEFORE FAILURE (MTBF) - MIL 217F | |
BB-ZXT9-IO-222R2: | 386969 hours |
BB-ZXT24-IO-222R2: | 383331 hours |
APPROVALS, DIRECTIVES, STANDARDS | |
FCC, Class A | |
CE (BB-ZXT24-IO-222R2 only) | 2011/65/EU - Reduction of Hazardous Substances Directive |
EMC | EN55022 Class A - Information Technology Equipment, RF Emissions EN55024 - Information Technology Equipment - Immunity EN61000-6-1 - Generic Standards for Residential, Commercial and Light-Industrial Environments |
UL | C1D2, File – E245458 |
Ordering Information
Zlinx Xtreme Wireless I/O | |
BB-ZXT9-IO-222R2 | DESCRIPTION 900 MHz* ANALOG INPUTS 2 ANALOG OUTPUTS 2 DIGITAL INPUTS 2 DIGITAL RELAY OUTPUTS 2 |
BB-ZXT24-IO-222R2 | DESCRIPTION 2.4 GHz* ANALOG INPUTS 2 ANALOG OUTPUTS 2 DIGITAL INPUTS 2 DIGITAL RELAY OUTPUTS 2 |
900 MHz Zlinx Xtreme Wireless I/O Kit * | |
BB-ZXT9-IOA-KIT | Zlinx Xtreme IP67 Peer-to-Peer I/O Kit: 2 - BB-ZXT9-IO-222R2 (I/O modules) 2 - BB-CLG-60-24 (power supply) 1 - BB-USBAMBM-6F (programming cable) |
* 900 MHz for North America only.
Kunden, die diesen Artikel gesehen haben, sahen auch