Advantech PCI-1285V
Value DSP-Based 8-Axis Stepping and Servo Motor Control Universal PCI Card
Eigenschaften
Beschreibung
Weitere Informationen
Ähnliche Produkte
Seite drucken
Preis anfragen
zeige Notizliste
PDF
Eigenschaften
Beschreibung
Weitere Informationen
PDF
- Encoder input is 10 MHz for 4xAB mode, 2.5 MHz for CW/CCW mode
- Pulse output up to 5 Mpps
- Supports linear and circular interpolation
- Hardware emergency input
- Supports E-Gear
- Supports programmable acceleration/deceleration rate
- Memory buffer (10K points) for trajectory planning which is designed in DSP(Auto-blending is not supported)
- Position compares triggering up to 100 KHz, and memory buffer is up to 100 K points in DSP
- Position latch
- Programmable interrupt and watchdog timer
- RDY/LTC-dedicated input channels & SVON/CMP/CAM-DO/ERC-dedicated output channels are switchable for general input and output purposes
The PCI-1285V is a 8-axis universal PCI (supporting both 3.3V and 5V signal Slot) stepping
/pulse-type servo motor control card designed for applications which need to control interp
olation, synchronization amon mulitple axes and continuous contouring. The PCI-1285V utilizes
the high-performance DSP and FPGA to calculate the motion trajectories, synchronization timing
control for multiple axes and input/output handling offer functionality suich as linear interpolation
2/3 axis circular interpolation. Compare trigger, T/S curve acceleration/deceleration rate and so on.
In addition Advantech supplies a Common Motion API library, graphical utility and user-friendly examples
to decrease programming load helping users complete configuration and diagnosis easily.
/pulse-type servo motor control card designed for applications which need to control interp
olation, synchronization amon mulitple axes and continuous contouring. The PCI-1285V utilizes
the high-performance DSP and FPGA to calculate the motion trajectories, synchronization timing
control for multiple axes and input/output handling offer functionality suich as linear interpolation
2/3 axis circular interpolation. Compare trigger, T/S curve acceleration/deceleration rate and so on.
In addition Advantech supplies a Common Motion API library, graphical utility and user-friendly examples
to decrease programming load helping users complete configuration and diagnosis easily.
Specifications
Pulse Type Motion Control
Position Compare I/O CMP
Encoder Interface
General
Ordering Information
Accessories
Pulse Type Motion Control
| Motor Driver Support | Pulse-type servo/stepping | |||
| Number of Axes | 4/8 | |||
| Interpolation | Linear, 2/3-axis circular interpolation | |||
| Max. Output Speed | 5 Mbps | |||
| Step Count Range | +-2, 147, 483, 646 | |||
| Pulse Output Type | Pulse/direction (1-pulse, 1-direction type), CW/CCW (2-pulse type) | |||
| Position Counters | Range of command and actual position | |||
| Velocity Profiles | T-Curve, S-Curve | |||
| Local I/O |
| Machine Interfaces: | LMT+, LMT-, ORG |
| Servo Driver Interfaces | ALM, INP |
Encoder Interface
| Input Type | Quadrature (A/B Phase) or up/down |
| Counts per Enc. Cycle | x1, x2, x3 |
| Input Range | 0 ~ 10V |
| Isolation Protection | 2,500V DC |
| Max. Input Frequency | 10 MMHz under 4xAB mode |
General
| Bus Type | Universal PCI V2.2 |
| Connectors | 1 x 100-pin SCSI female connector |
| Dimensions (L x H) | 175 x 100 mm(6.9" x 3.9") |
| Power Consumption | Typical: 5V @ 850mA Max: 5V @1A |
| Humidity | 5 ~ 95%RH, non-condensing (IEC 60068-2-3) |
| Operating Temperature | 0 ~ 60°C (32 ~ 140°F) |
| Storage Temperature | -20 ~ 85°C (-4 ~ 185°F) |
Ordering Information
| PCI-1245V-AE | Value 4-axis Stepping/Pulse-type Servo Motor COntrol Universal PCI Card |
| PCI-1285V-AE | Value 8-axis Stepping/Pulse-type Servo Motor COntrol Universal PCI Card |
Accessories
| ADAM-3956-AE | 100-pin DIN-rail SCSI 4-axis Motion Wiring Board |
| ADAM-3955-AE | 50-pin DIN-rail SCSI 2-axis Motion Wiring Board |
| ADAM-3952-AE | 50-pin DIN-rail SCSI and Box Header Board |
| ADAM-39100-AE | 100-pin DIN-rail SCSI Wiring Board |
| PCL-101100M-1E/2E/3E | 100-pin SCSI Cable, 1m/2m/3m |
| PCL-10251-1E/2E/3E | 100-pin SCSI to Two 50-pin SCSI Cable, 1m/2m/3m |
| PCL-10153PA5-2E | 50-pin Cable to Panasonic A4/A5 Servo, 2m |
| PCL-10153YS5-2E | 50-pin Cable to Yaskawa Sigma V/7 Servo,2m |
| PCL-10153MJ3-2E | 50-pin Cable to Mitsubishi J3/J4 Servo, 2m |
| PCL-10153DA2-2E | 50-pin Cablte to Delta A2 Servo, 2m |
Kunden, die diesen Artikel gesehen haben, sahen auch