PERLE IOLAN DS1 and TS2

SPHINX in Europa
CH
  • AT
  • BE
  • DK
  • FR
  • DE
  • IE
  • IT
  • NL
  • ES
  • SE
  • CH
  • UK
Produktgruppen > Device Server > PERLE IOLAN DS1 and TS2

PERLE IOLAN DS1 and TS2

Serial to Ethernet Device Servers

PERLE IOLAN DS1 and TS2
782_23903.png
782_23904.jpg
782_23906.jpg
782_23907.jpg
782_23908.jpg
782_23909.jpg
782_23910.jpg
782_23911.jpg
  • EigenschaftenEigenschaften
  • BeschreibungBeschreibung
  • Weitere InformationenWeitere Informationen
  • PDFPDF
  • 1 or 2 serial Ports
  • Software selectable RS232/422/485 or fixed RS232 serial port interface
  • 10/100 Ethernet


Der IOLAN DS/TS Device Server ist die beste Wahl für einfache Seriell zu Ethernet Anwendungen. Als kostengünstige Lösung im kompakten Design bietet der IOLAN DS/TS hohe Flexibilität, und durch die fortschrittliche TrueSerial® -Technologie ist er optimal geeignet für Anwendungen, die eine authentische serielle Verbindung über ein Ethernet-Netzwerk benötigen. IOLAN DS1 Device Server sind ausserdem verfügbar mit eingebauter Unterstützung für den Einsatz über einen erweiterten Temperaturbereich von -40°C bis +74°C.

Flexible und zuverlässige Verbindungen von seriellen Schnittstellen zu Ethernet-Schnittstellen

Der IOLAN DS/TS eignet sich ideal, um serielle COM-, UDP- oder TCP-Socket-basierte Anwendungen und entfernte Geräte zu verbinden. TruePort-Weiterleitung von Perle stellt servergestützten Anwendungen feste ™Y- oder COM-Kanäle zur Verfügung und erlaubt so die Kommunikation mit entfernten Geräten, die mit Perle- Geräteservern verbunden sind. Serielle Daten können über ein IP-Netz zwischen einzelnen Geräten mittels Tunnelling ausgetauscht werden.

Einfache Konfiguration und Administration - der IOLAN DS1/TS2 hat über Software selektierbare RS232/422/485 Schnittstellen, dies erleichtert die Konfiguration und verhindert zudem bösartige Manipulationen, die bei den handelsüblichen Lösungen mit DIP-Schaltern möglich sind.

Die Device Management Software von Perle ist beim IOLAN DS/TS im Lieferumfang enthalten und bietet die verbesserte, zentrale Kontrolle und Steuerung mehrerer Geräte, dadurch wird die Verfügbarkeit Ihrer entfernten Server maximiert. Der IOLAN DS/TS ist ferner mit einem 15kV Überspannungsschutz ausgerüstet, dadurch wird auch die Ausfallsicherheit stark erhöht.

IOLAN-Plug-ins

Device Server von Perle wurden aus der Erfahrung Tausenden und mehr Verbindungen von seriellen Schnittstellen zu Ethernet geboren. Mit der Inbetriebnahme eines Perle Device Server können Sie sicher sein, dass Ihre Geräte, welche durch einen seriellen COM-Port mit Ihrer Applikation verbunden sind, so reibungslos weiterlaufen, als wären sie direkt verbunden. Falls der unwahrscheinliche Fall eintreten sollte, dass der Device Server nicht sofort “out of the box” diese Verbindung ermöglicht, Perle wird Ihre Applikation zum Laufen bringen.

Device Server von Perle welche dem Kunden spezielle “Device Plug-ins” zur Verfügung stellt. Diese “Device Plug-ins” sorgen für die erfolgreiche Vernetzung der Geräte, wo andere Lösungen bislang.

Modernste IP-Technologie

Der IPv6 Standard findet in der Industrie immer größere Verbreitung. Die IOLAN-Reihe von Perle bietet dank der vollen Konformität zum IPv6-Standard Firmenkunden unübertroffenen Investitionsschutz.

Der Bedarf für IPv6 (welches vom Adress-Schema mit IPv4 kompatibel ist) wird weitgehend durch das Wachstum von IP-Addressen getrieben. Mit der Integration und dem Rollout von fortgeschrittlichen Mobilfunknetzen, wird eine robuste Methode benötigt, um eine schnelle Inbetriebnahme einer großen Anzahl von neuen IP-adressierbaren Geräten zu bewältigen. Das US-Verteidigungsministerium spezifiziert, daß alle zu beschaffenden EDV-Investitionen IPv6 konform sein müssen. Zudem bieten alle gängigen Betriebssysteme wie Linux, UNIX, Windows Solaris und auch Router bereits volle IPv6 Unterstützung.

Daher ist es wichtig, daß Endkunden und System-Integratoren nur Geräte einkaufen, die IPv6 unterstützen. Unsere IOLAN-Reihe mit eingebauter IPv6 Unterstützung ist daher die beste Wahl um serielle Geräte an das Ethernet anzubinden.

Lebenslange Garantie

Der Perle IOLAN DS/TS wird zusammen mit den besten Service- und Supportleistungen im gesamten Industriebereich angeboten, dies beinhaltet auch Perles einzigartige lebenslange Garantie. Perle beliefert bereits seit 1976 Kunden mit Netzwerk-Produkten, die seit jeher höchste Leistung, Flexibilität und Qualität bieten.



ProdGrafik

Serial Port Access
Connect directly using Telnet and Reverse Telnet
Multihost access enables multiple hosts/servers to share serial ports
Accessibility
In-band ( ethernet ) and out-of-band ( dial-up modem ) support
IPV6 and IPV4 addressing support
Availability
Primary/Backup host functionality enables automatic connections to alternate host(s)
Security
Local database USERID/PASSWORD
Disable unused daemons
Terminal Server
Telnet
Auto session login
MOTD - Message of the day
Serial machine to Ethernet
Tunnel raw serial data across Ethernet
Raw serial data over TCP/IP
Raw serial data over UDP
Serial data control of packetized data
Share serial ports with multiple hosts/servers
Virtual modem simulates a modem connection - assign IP address by AT phone number
TruePort com/tty redirector for serial based applications on Windows, Linux, Solaris, SCO, HP UX, NCR UNIX and AIX.
"TrueSerial packet technology provides the most authentic serial connections across Ethernet ensuring serial protocol integrity"
RFC 2217 standard for transport of serial data and RS232 control signals
Customizable or fixed serial baud rates
Plug-ins allow customer or Perle provided plug-ins for special applications
Software Development Kit ( SDK ) available
Serial encapsulation of industrial protocols such as ModBus, DNP3 and IEC-870-5-101
ModBus TCP gateway enables serial Modbus ASCII/RTU device connection to ModBus TCP
Data logging will store serial data received when no active TCP session and forward to network peer once session re-established - 4K bytes circular per port
Console Management
Sun / Oracle Solaris Break Safe
Reverse Telnet
OA&M ( Operations, Administration and Management )
SNMP V3* - read and write, Perle MIB
Syslog
Perle Device Manager - Windows based utility for large scale deployments
Configurable default configuration
Installation Wizard
Set a Personalized Factory Default for your IOLANs
Protocols
IPv6, IPv4, TCP/IP, ARP, RARP, UDP, UDP Multicast, ICMP, BOOTP, DHCP, TFTP, Telnet, raw, reverse Telnet, WINS, H™P, SNMPV3*, RFC2217


* No SNMPV3 encryption. For full SNMPV3 support see IOLAN SDS Device Servers.


Hardware Specifications - IOLAN DS1 - TS2



IOLAN DS1 IOLAN TS2 IOLAN DS1 G IOLAN TS2 G
Processor MPC852T, 66 Mhz, 87 MIPS 600Mhz ARM Processor
Memory
RAM MB 16 512
Flash MB 4 4000
Interface Ports
Number of Serial Ports 1 2 1 2
Serial Port Interface Software selectable RS-232/422/485 on DB25M, DB25F, DB9M or RJ45 RS-232on RJ45 - 10 pin Software selectable RS-232/422/485 on DB25F, DB9M or RJ45 RS-232on RJ45 - 10 pin
Sun / Solaris Sun / Oracle ‘Solaris´ Safe - no "break signal" sent during power cycle causing costly server re-boots or downtime
Serial Port Speeds 50bps to 230Kbps with customizable baud rate support 300bps to 230Kbps with customizable baud rate support
Data Bits 5,6,7,8, 9-bit protocol support
Parity Odd, even, Mark, Space, None
Flow Control Hardware, Software, Both, None
Serial Port Protection 15Kv Electrostatic Discharge Protection ( ESD )
Local Console Port RS232 on Serial Port
Network 10-base T / 100-base TX ethernet RJ45 Autosensing 1000-base-T / 100-base TX / 10-base T Auto-MDIX
Software selectable Ethernet speed 10/100 Auto Software selectable Ethernet speed 10/100/1000
Software selectable Half/Full/Auto duplex
Ethernet Isolation 1.5Kv Magnetic Isolation
Power
Power Supply 120 V AC (USA), 230V AC (International) Wall Power Adaptor included
Power Supply Options Power via External power 9-30v DC, 4.8 Watts uses standard 5.5mm x 9.5mm x 2.1mm barrel socket, Power IN over serial cable.
Nominal Input Voltage 12v DC / 24v DC
Input Voltage Range 9-30v DC
Power IOLAN over Serial 9 - 30v DC with DB25 and RJ45 models N/A 9 - 30v DC with DB25 and RJ45 models
Typical Power Consumption ´@ 12v DC ( Watts ) 1.7 1.7 1.9 2
Indicators
LEDs Power / Ready
Network Link
Network Link activity
Serial: Transmit and Receive data per port
Environmental Specifications
Heat Output ( BTU/HR ) 5.8 5.8 6.8 8.9
MTBF ( Hours ) 124,004 299,680 267,483 254,834
Calculation model based on MIL-HDBK-217-FN2 @ 30 °C>
Operating Temperature 0ºC to 55ºC,
32ºF to 131ºF
Storage Temperature -40ºC to 66ºC,
-40ºF to 150ºF
Humidity 5 to 95% (non condensing) for both storage and operation.
Case SECC Zinc plated sheet metal (1 mm)
Ingress Protection Rating IP40
Mounting Wall or Panel mounting . DIN Rail mounting kit optional
Product Weight and Dimensions
Weight .23 KG (.51 lbs)
Dimensions 90 x 64 x 22 (mm), 3.6 x 2.5 x 0.87 (in) case dimensions not including mounting tabs,
90 x 89 x 24 (mm), 3.6 x 3.5 x 0.87 (in) includes mounting tabs.
Packaging
Shipping Dimensions 260 x 170 x 70 (mm), 10.2 x 6.7 x 2.8 (in)
Shipping Weight 0.49 KG (1.1 lbs)
Regulatory Approvals
Emissions CFR47:2003, Chapter 1, Part 15 Subpart B,(USA) Class A CFR47 FCC Part 15 Subpart B:2015
ICES-003, Issue 4, February 2004 (Canada) ICES-003:2016 Issue 6:2016
CISPR 32:2015/EN 55032:2015 (Class A)
CISPR 16-2-3:2010/A2:2014
EN61000-3-2 : 2010, Limits for Harmonic Current Emissions EN61000-3-2:2014, Limited for Harmonic Current Emissions
EN61000-3-3 : 2010, Limits of Voltage Fluctuations and Flicker EN61000-3-3:2013, Limits of Voltage Fluctuations and Flicker
Immunity CISPR 24:2010/EN 55024:2010
EN61000-4-2: 2009 Electrostatic Discharge
EN61000-4-3: 2006/A2:2010: RF Electromagnetic Field Modulated
EN61000-4-4: 2004 Fast Transients
EN61000-4-5: 2006 Surge
EN61000-4-6: 2009 RF Continuous Conducted
EN61000-4-8: Power-Frequency Magnetic Field
EN61000-4-11: Voltage Dips and Voltage Interruptions
Safety IEC 60950-1 (ed 2); am1 am2 and EN 60950-1:2006 +A11:2009 +A1:2010 +A12:2011 +A2:2013 IEC 62368-1 and EN 62368-1:2014
CAN/CSA-C22.2 No. 60950-1-03 and ANSI/UL 60950-1, Second Edition CAN/CSA-C22.2 No. 62368-1-14 and UL 62368-1
Other Reach, RoHS and WEEE Compliant
Directive 2011/65/EU restriction of the use of certain hazardous substances in electrical and electronic equipment and meets the following standard:: EN 50581:2012
ECCN - 5A991
HTSUS Number: 8471.80.1000
Perle Lifetime warranty

Serial Connector Pinout
IOLAN DB9M Socket Direction RS232 RS485 Full Duplex RS485 Half Duplex RS422
1 in DCD - - -
2 in RxD RxD+ - RxD+
3 out TxD TxD+ DATA+ TxD+
4 out DTR - - -
5 line GND GND GND GND
6 in DSR RxD- - RxD-
7 line RTS - - -
8 in CTS - - -
9 line - TxD- DATA- TxD-
IOLAN RJ45 Socket Direction RS232 RS485 Full Duplex RS485 Half Duplex RS422
1 line Power In Power In Power In Power In
2 in DCD - - -
3 out RTS TxD+ DATA+ TxD+
4 in DSR - - -
5 out TxD TxD- DATA- TxD-
6 in RxD RxD+ - RxD+
7 line GND GND GND GND
8 in CTS RxD- - RxD-
9 out DTR - - -
10 line - - - -
IOLAN DB25M Socket Direction RS232 RS485 Full Duplex RS485 Half Duplex RS422
1 line Sheild Sheild Sheild Sheild
2 out TxD - - -
3 in RxD - - -
4 out RTS - - -
5 in CTS - - -
6 in DSR - - -
7 line GND GND GND GND
8 in DCD - - -
9 line - - - -
12 line Power In Power In Power In Power In
13 line - - - CTS-
14 line - TxD+ DATA+ TxD+
15 line - TxD- DATA- TxD-
18 line - - - RTS+
19 line - - - RTS-
20 out DTR - - -
21 line - RxD+ - RxD+
22 line - RxD- - RxD-
25 line - - - CTS+
IOLAN DB25F Socket Direction RS232 RS485 Full Duplex RS485 Half Duplex RS422
1 line Sheild Sheild Sheild Sheild
2 in RxD - - -
3 out TxD - - -
4 in CTS - - -
5 out RTS - - -
6 out DTR - - -
7 line GND GND GND GND
8 in DCD - - -
9 line - - - -
12 line Power In Power In Power In Power In
13 line - - - RTS-
14 line - RxD+ - RxD+
15 line - RxD- - RxD-
18 line - - - CTS+
19 line - - - CTS-
20 in DSR - - -
21 line - TxD+ DATA+ TxD+
22 line - TxD- DATA- TxD-
25 line - - - RTS+






TCP
Using RAW TCP Sockets

A raw TCP socket connection which can be initiated from the serial-Ethernet device or from the remote host/server. This can either be on a point to point or shared basis where a serial device can be shared amongst multiple devices. TCP sessions can be initiated either from the TCP server application or from the Perle IOLAN serial-Ethernet adapter.


UDP
Using Raw UDP Sockets

For use with UDP based applications, Perle IOLANs can convert serial equipment data for across UDP packets either on a point to point basis or shared across multiple devices.


Console Server
Console Management

For access to remote console ports on routers, switches, etc, Perle IOLAN’s enable administrators secure access to these RS232 ports via inband Reverse Telnet or out of band with dial-up modems. Perle IOLAN models with integrated modems are available.


COM/™Y
Connect Serial-based Applications with a COM/™Y Port Driver

Serial ports can be connected to network servers or workstations running Perle´s TruePort software operating as a virtual COM port. Sessions can be initiated either from the Perle IOLAN or from TruePort.


Tunneling
Serial Tunneling between two Serial Devices

Serial Tunneling enables you to establish a link across Ethernet to a serial port on another IOLAN. Both IOLAN serial ports must be configured for Serial Tunneling (typically one serial port is configured as a Tunnel Server and the other serial port as a Tunnel Client).


Virtual Modem
Virtual Modem

Enables the serial-Ethernet adapter to simulate a modem connection. When connected to the IOLAN and initiates a modem connection, the IOLAN starts up a TCP connection to another IOLAN serial-Ethernet adapter configured with a Virtual Modem serial port or to a host running a TCP application.






Kunden, die diesen Artikel gesehen haben, sahen auch
Alle Cookies akzeptieren Ablehnen Konfigurieren

Diese Website verwendet Cookies, um eine bestmögliche Erfahrung bieten zu können. Mehr erfahren.